protection wire rope sling
"
7/8" parada de extremidade da corda de fio, de aço inoxidável rosqueado estampam o parafuso prisioneiro
7/8" Stainless Steel Threaded Swage Stud, Terminals for Wire Rope, long-term durability Wire Rope End Fittings Description Our Threaded Swage Stud are designed to be swaged or crimped into position.They are used to allow tightening of cable assemblies to specific tensions. Available in left- or right-handed thread. Metric threads available upon request. The Threaded Swage Studs are forged from high tensile stainless steel, while galvanization ensures its long-term durability.
A parada de extremidade galvanizada da corda de fio de aço fechou o soquete 1 - 1/8" de Spelter
1-1/8" Closed Spelter Socket,Closed Spelter Socket, End Fitting for Wire Rope, long-term durability Description The Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. Our Closed Spelter Socket is made in accordance with RR-S-550D requirements, and available for wire rope with a diameter from 1/4" to 5".
Dedal 32mm da corda de fio contínuo do aço de molde do ISO 9001 de GB/T 5974,2
Solid Thimble for Wire Rope Product Description Our Solid Thimbles are used to protect the eyes of cable and wire rope slings from abrasion by providing a solid steel barrier between the fragile cable strands and the other rigging fitting used in the connection. They are designed according to GB/T 5974.2-2006 standards for making a 'hard' eye with wire rope, it creates a loop at wire rope ends. - Solid Thimbles for Wire Ropes with diameters from 8mm to 32mm are made of Cast
Algemas de corpo largo de liga de aço U Parafuso Clipe de cabo de aço maleável
U-Bolt Wire Rope Clip - Malleable Product Overview Wire rope clips are used to secure the loose end of a wire rope when forming an eye. The U-Bolt Clips have a u-bolt that is secured into a saddle by two nuts. Wire rope assemblies almost always require two, or more wire rope clamps to secure the wire rope properly. Drop forged wire rope clips are more heavy duty than malleable rope clips and can therefore be used for more heavy-duty rigging applications. In addition, they
Virolas de alumínio do EN 13411-3 para a corda de fio
TALUKON™ Ferrule Aluminum Ferrule, a conical ferrule made for sling application Product Description TALUKON™ is a conical ferrule made for sling application. It has an inspection hole to ensure the short end of the wire rope is correctly positioned after pressing. It also has a very tight fit compared to other conical ferrules on the market. The wire rope termination will not get caught during lifting and will simply slide of an obstacle. This will minimize the risk of
As virolas padrão do Turnback prendem o aço carbono da parada de extremidade da corda
T-LOC™ Steel Reinforcement Ring made from carbon steel and swaged together with a standard turnback ferrule Product Description T-LOC™ is a reinforced aluminium termination. It prevents the aluminum ferrule from splitting, especially when using a heavy duty thimble. It is approved for wire ropes of grade 2160. T-LOC™ is made from carbon steel and swaged together with a standard turnback ferrule, type T. Art. No: T-LOC 10 – T-LOC 66 Patent pending: Application no. PCT/SE2010
EN 13411-3 Terminais redondos de cabo de aço 3.1 T e virolas TKH
3.1 T AND TKH FERRULES EUROPEAN STANDARD SYSTEM – EN 13411-3 Product Description 3.1 T AND TKH FERRULES TKH ferrule EUROPEAN STANDARD SYSTEM – EN 13411-3 GENERAL DESCRIPTION The aluminium ferrules, type T and type TKH correspond to the European standard for turnback ferrules (also known as ferrule secured eye terminations, FSET). The standard is EN 13411-3. The ferrule system is specified in Appendix 1. The ferrules are extruded seamlessly over mandrel and the aluminium alloy
Terminais redondos de corda de aço de liga de alumínio 3.1 T / TKH
TALURIT® Round Aluminium End Stops made of Aluminium alloy not used for lifting MATCHING WIRE ROPE TO FERRULE Selection of the correct ferrule is to take account of: -The measured rope diameter -The rope type (and core) -The nominal fill factor, f (or metallic cross-sectional area factor, C) of the rope. Very important for fibre core ropes! Case 1 For single layer round strand ropes with fibre core and cable-laid ropes having a fill factor of at least 0,36 (C≥0,283) and max 0
Galvanizado 8mm cabo de arame End Stop Open Spelter Sockets com Cotter Pin SOA-08
Open Spelter Socket with cotter pin, 8mm in rope diameter, End Fitting for Wire Rope, long-term durability Wire Rope End Fittings Description Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. The Open Spelter Socket with cotter pin is available for wire rope with a
